The tradition & historical record
5 min read · 19 sourcesAid climbing is a form of rock climbing that uses mechanical devices and equipment, such as aiders (also called 'ladders'), to assist in generating upward momentum. Aid climbing is contrasted with free climbing (in both its traditional or sport free-climbing formats), which can use mechanical equipment only for climbing protection, not to assist in any upward momentum. Aid climbing can involve hammering in permanent pitons and bolts, into which the aiders are clipped, but there is also 'clean aid climbing', which avoids any hammering and uses only temporary removable placements such as spring-loaded camming devices. While aid climbing traces its origins to the start of all climbing when ladders and pitons were common, its use in single-pitch climbing waned in the early 20th century with the rise of free climbing. At the same time, the Dolomites saw the start of modern "big wall aid climbing", where pioneers like Emilio Comici developed new tools and techniques. 1
Description
Aid climbing is a form of rock climbing that uses mechanical devices and equipment for upward momentum. Like traditional and sport climbing, aid climbing is typically done in pairs with a lead climber making the "placements" into which ladders (known as aiders) are clipped, thus enabling them to ascend. After the lead climber has reached the top, the second climber (or belayer) then removes the placements as they jumar up the rope. Traditional aid climbing relied on fixed placements, which were mainly metal pitons that the lead climber hammered into the rock as they ascended. These placements remained permanently fixed on the route (and in such cases, the second (or belayer) didn't have to take any placement out and just jumared up on a fixed rope). Clean aid climbing avoids any hammering and uses the temporary protection of traditional climbing (e.g. spring-loaded camming devices) for placements; these are then removed by the second climber as they make their own ascent. This method therefore avoids the damage of repeated hammering of metal to aid routes, and has been advocated as useful training and building up of experience in the placing of traditional climbing protection. While the sport of aid climbing has waned as the free climbing movement has grown, elements of aid climbing are still a regular feature of many major big wall climbing and alpine climbing routes. These routes are long multi-pitch climbs where it is possible to find specific sections that are considerably above the difficulty level of the rest of the route. For such sections, aid climbing techniques are accepted even by free climbers. 1
History
Aid climbing traces its origins to the start of all climbing, with ladders used on historic ascents such as the 1492 ascent of Mont Aiguille, the 1786 ascent of Mont Blanc, or the 1893 ascent of Devils Tower, and with drilled bolts on historic ascents such as the 1875 first ascent of Half Dome. By the start of the 20th century, the widespread use of aid (e.g. ladders and pitons) was challenged by the free climbing movement led by Paul Preuss. While the use of aid diminished on single-pitch routes, big wall climbers in the Dolomites, such as Tita Piaz, further developed aid climbing techniques. The legacy of the Dolomites as the birthplace of big-wall and modern aid climbing was cemented by pioneer Emilio Comici who developed the multi-step aider (or ladder). In 1933, Comici used these aid climbing techniques to climb the overhanging north face of the Cima Grande, then the world's hardest big wall aid route. Comici's aid techniques were used by the leading European big wall and alpine climbers such as Riccardo Cassin on famous routes across the European Alps. In 1946, John Salathé developed a piton made from high-carbon chrome-vanadium (salvaged from the axles of Ford cars), which enabled him to overcome the hard granite cracks of Yosemite and climb the iconic Lost Arrow Spire in 1947 with Ax Nelson. Salathé's new aid climbing equipment (including the skyhook), led to a "golden age" in big wall aid climbing. In 1957, a team led by Royal Robbins used Salathé's aid tools to climb the Northwest Face of Half Dome in Yosemite, ushering in modern American big wall aid climbing. 1
Equipment
Modern aid climbing typically uses most of the equipment used in traditional climbing and particularly the protection equipment of traditional climbing (e.g. nuts, hexcentrics and tricams, and spring-loaded camming devices) that are needed for clean aid climbing. Where aid climbing is done as part of big wall climbing, which is normally its most common format, even more equipment is required (e.g. including haul bags, hauling pulleys and trail ropes; portaledges, and poop tubes). A number of unique items of equipment are also used in aid climbing: 1
Fixed placement equipment
Before the introduction of clean aid climbing, placements were hammered in by the aid climber as they ascended, with metal pitons hammered into cracks being a common placement (and the various piton types including Lost Arrows, bongs, angles and knifeblades), but also including copperheads (or heads); aid climbers may also use bolt kits to place fixed bolts where there are no suitable cracks for pitons while ascending. 1
Aiders and daisy chain systems
The equipment used to ascend via the hammered in placements are dual sets of aiders, which are like ladders made of webbing material, and come in various styles including adjustable strap-aiders, and stirrup-style "etriers". These aiders are attached to the aid climber via a matching dual set of daisy chains (which can be loop-style or adjustable), and the aid climber will use fifi hooks to manage the effective length of the daisy chains. 1
The text above is adapted from the Wikipedia article “Aid climbing”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
aid climbing is a form of climbing in which progress is made using artificial devices, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 3 external registers, which can be verified through the citation. 2





