The tradition & historical record
6 min read · 19 sourcesBoat building is the design and construction of boats (instead of the larger ships) — and their on-board systems. This includes at minimum the construction of a hull, with any necessary propulsion, mechanical, navigation, safety and other service systems as the craft requires. The boat building industry provides for the design, manufacturing, repair and modification of human-powered watercraft, sailboats, motorboats, airboats and submersibles, and caters for various demands from recreational (e.g. launches, dinghies and yachts), commercial (e.g. tour boats, ferry boats and lighters), residential (houseboats), to professional (e.g. fishing boats, tugboats, lifeboats and patrol boats). 1
Wood
Wood is the traditional boat building material used for hull and spar construction. It is buoyant, widely available and easily worked. It is a popular material for small boats (of e.g. 6-metre (20 ft) length; such as dinghies and sailboats). Its abrasion resistance varies according to the hardness and density of the wood and it can deteriorate if fresh water or marine organisms are allowed to penetrate the wood. Woods such as teak, totara and some cedars have natural chemicals which prevent rot whereas other woods, such as Pinus radiata, will rot very quickly. The hull of a wooden boat usually consists of planking fastened to frames and a keel. Keel and frames are traditionally made of hardwoods such as oak while planking can be oak but is more often softwood such as pine, larch or cedar. Traditional wood construction techniques can be classified into the "shell-first" method (also called "planking first") and the "frame first" method. With "shell first", the form of the hull is determined by joining shaped planks that are fastened together, followed by reinforcing the structure with the frames (or ribs) that are fitted to the inside. With "frame first", the hull shape is established by setting up the frames on the keel and then fastening the planking on the outside. Some types of wood construction include: 1
Carvel, in which a smooth hull is formed by fastening flush-fitting planks to underlying frames. The planks may be curved in cross section like barrel staves. Carvel planks are generally caulked with oakum or cotton that is driven into the seams between the planks and covered with some waterproof substance. It takes its name from the caravel and is believed to have originated in the Mediterranean. 1
Iron and steel
Either used in sheet or alternatively, plate for all-metal hulls or for isolated structural members. It is strong, but heavy (despite the fact that the thickness of the hull can be less). It is generally about 30% heavier than aluminium and somewhat more heavy than polyester. The material rusts unless protected from water (this is usually done by means of a covering of paint). Modern steel components are welded or bolted together. As the welding can be done very easily (with common welding equipment), and as the material is very cheap, it is a popular material with amateur builders. Also, amateur builders which are not yet well established in building steel ships may opt for DIY construction kits. If steel is used, a zinc layer is often applied to coat the entire hull. It is applied after sandblasting (which is required to have a cleaned surface) and before painting. The painting is usually done with lead paint (Pb3O4). Optionally, the covering with the zinc layer may be left out, but it is generally not recommended. Zinc anodes also need to be placed on the ship's hull. Until the mid-1900s, steel sheets were riveted together. 1
Aluminum
Aluminum and aluminum alloys are used both in sheet form for all-metal hulls or for isolated structural members. Many sailing spars are frequently made of aluminium after 1960. It is the lightest material for building large boats (being 15–20% lighter than polyester and 30% lighter than steel). Aluminium is relatively cheap in comparison with wood or steel in most countries. In addition it is relatively easy to cut, bend and weld. Galvanic corrosion below the waterline in salt water is a serious concern, particularly in marinas where there are other conflicting metals. Aluminium is most commonly found in yachts, pontoon and power boats that are not kept permanently in the water. Aluminium yachts are particularly popular in France. 1
Cupronickel
A relatively expensive metal used only very occasionally in boatbuilding is cupronickel. Cupronickel is reasonably tough, highly resistant to corrosion in seawater, and is (because of its copper content) an antifouling metal. Cupronickel may be found on the hulls of premium tugboats, fishing boats and other working boats; and may even be used for propellers and propeller shafts. 1
Fiberglass
Fiberglass (glass-reinforced plastic or GRP) is typically used for production boats because of its ability to reuse a female mould as the foundation for the shape of the boat. The resulting structure is strong in tension but often needs to be either laid up with many heavy layers of resin-saturated fiberglass or reinforced with wood or foam in order to provide stiffness. GRP hulls are largely free of corrosion though not normally fireproof. These can be solid fiberglass or of the sandwich (cored) type, in which a core of balsa, foam or similar material is applied after the outer layer of fiberglass is laid to the mould, but before the inner skin is laid. This is similar to the next type, composite, but is not usually classified as composite, since the core material in this case does not provide much additional strength. It does, however, increase stiffness, which means that less resin and fiberglass cloth can be used in order to save weight. Most fibreglass boats are currently made in an open mould, with fibreglass and resin applied by hand (hand-lay-up method). Some are now constructed by vacuum infusion where the fibres are laid out and resin is pulled into the mould by atmospheric pressure. This can produce stronger parts with more glass and less resin, but takes special materials and more technical knowledge. Older fibreglass boats before 1990 were often not constructed in controlled temperature buildings leading to the widespread problem of fibreglass pox, where seawater seeped through small holes and caused delamination. The name comes from the multitude of surface pits in the outer gelcoat layer which resembles smallpox. Sometimes the problem was caused by atmospheric moisture being trapped in the layup during construction in humid weather. 1
The text above is adapted from the Wikipedia article “Boat building”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
building of pleasure and sporting boats is design and construction of floating vessels, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 15 external registers, which can be verified through the citation. 2





