The tradition & historical record
7 min read · 18 sourcesCandlepin bowling is a variation of bowling that is played primarily in the Canadian Maritime provinces and the New England region of the United States. It is played with a handheld-sized ball and tall, narrow pins that resemble candles, hence the name. 1
Comparison to ten-pin bowling
As in other forms of pin bowling, players roll balls down a 60-foot (18 m) wooden or synthetic lane to knock down as many pins as possible. Differences between candlepin bowling and ten-pin bowling include: 1
Candlepin involves three rolls per frame, rather than two rolls as in ten-pin. Candlepin balls are much smaller, being 4+1⁄2 inches (11.4 cm) in diameter and have a maximum weight of 2 lb 7 oz (1.11 kg) They are almost identical in weight to a pin, as opposed to ten-pin balls whose maximum allowable weight is more than four times that of a pin. No oil is applied to the lane, so the ball does not skid but rolls all the way down the lane. Candlepin balls lack finger holes. Candlepins are thinner (hence the name "candlepin"), which increases the amount of space between pins, further reducing scoring. Fallen pins ("wood") are not cleared away between rolls during a frame, so long as the entire pin stays behind the "dead wood" line, which is 24 inches (61 cm) in front of the "head pin" spot. Wood in the gutters is "dead wood", which means that if the ball makes its first contact with it, the pins felled do not count, nor are they re-spotted. 1
History
The International Candlepin Bowling Association (ICBA) website states that candlepin bowling was first played in 1880 in Worcester, Massachusetts, thought to have been developed by Justin White, owner of a billiards and bowling hall. A 1987 Sports Illustrated article stated the game was invented in 1881 in that town by one John J. Monsey, a billiards player, who is recognized for standardizing the game. A 1891 newspaper notice shows the incremental introduction of a single "candle-pin bowling set" into a bowling alley originally hosting other types of bowling. In 1906, Monsey created the National Duckpin and Candlepin Congress, which regulated ball size, pin shape and size, and lane surface characteristics, facilitating formation of leagues and other competitions. Originally, pins were 1-inch-thick (25 mm) dowels, resembling candles, thought to give rise to the name, candlepins. An 1888 newspaper article referred to 2-inch-thick (51 mm) pins. Both were thinner than modern candlepins which are specified to be 2+15⁄16 inches (75 mm) thick. In the late 1960s, plastic candlepins began to replace wood candlepins, a change that some thought required a change in game strategy. 1
In 1947, lawyers Howard Dowd and Lionel Barrow overcame the need for human pinsetters by inventing the first automatic candlepin pinsetter, called the "Bowl-Mor", the two inventors receiving a patent that issued in 1956. Stations WHDH-TV/5 & the later licensee of channel 5, WCVB-TV, aired candlepin bowling's first televised show from 1958 through 1996, and in 1964, The Boston Globe launched its own annual candlepin tournament. In 1965, the World Candlepin Bowling Council (WCPC) began its Hall of Fame, inducting WCVB commentator Don Gillis in 1987. 1
Gameplay
Candlepins are 15+3⁄4 inches (40 cm) high and 2+15⁄16 inches (75 mm) thick in diameter. Balls are 4+1⁄2 in (11.4 cm) in diameter and lighter than a single candlepin. A candlepin bowling lane, almost identical to a tenpin bowling lane, has an approach area of 14 to 16 feet (4.3 to 4.9 m) for the player to bowl from, and then the lane proper, a maple surface approximately 41 inches (1.05 m) wide, bounded on either side by a gutter (or "channel" or trough). The lane is separated from the approach by a "foul line" common to most bowling sports, which players must not cross. At the far end of the lane are the pins, 60 feet (18 m) from the foul line to the center of the headpin (or pin #1), placed by a pinsetter machine which occupies space both above and behind the pins. Unlike a tenpin lane, which has a level surface from the foul line to the back end of the lanebed's "pin deck", a candlepin lane has a hard-surfaced "pin plate" where the pins are set up, with the pin plate depressed 7⁄16 inch (11 mm) below the lanebed forward of it. The pin plate can be made from hard-surfaced metal, phenolic, high density plastic, or a synthetic material. Behind the pin plate area is a well-depressed "pit" area for the felled pins and balls to fall into. A heavy rubber backstop, faced with a black curtain, catches the flying pins and balls so they drop into the pit. Generally there is seating behind the approach area for teammates, spectators, and score keeping. The candlepins themselves are 15+3⁄4 inches (40 cm) tall, have a cylindrical shape which tapers equally towards each end (and therefore have no distinct "top" or "bottom" end, unlike a tenpin), giving them an overall appearance somewhat like a candle, and have a maximum weight of 2 lb 8 oz (1.13 kg) apiece. 1
Fouls
A foul (scored by an F on some computer scoring systems) refers to a ball that first rolls into the gutter and then strikes deadwood (felled pins resting in the gutter) or hops out of the gutter and strikes a standing pin, a "lob"-bed ball that touches neither the approach nor lane in the three meters' distance of lanebed before the lob line, or as in tenpins and duckpins, a roll made when a bowler's foot crosses over the foot foul line. Special scoring comes into play. A foul always scores zero (0) pinfall for that ball's delivery. A player may reset the pins after a foul on the first or second ball provided no pins have legally been felled in that box. Therefore, if on the first ball there is a foul or zero, and on the second ball the bowler fouls and knocks down pins, the pins may be reset, allowing the bowler an opportunity to score on their third ball. Knocking down all ten pins after resetting immediately following a foul in the first ball results in a spare. Fouling on all three attempts scores a zero box. If the first ball knocked down at least one pin, the rack can not be reset because of a subsequent foul. Those pins felled by a foul ball (a ball rolled into the gutter, a lobbed ball, a ball delivered by a bowler over the foot foul line)—whether standing, playable wood, or pins in the gutter—remain down and reduce the maximum number of pins to be counted for the box. Therefore, if there are six pins standing after the first ball, a foul on the next ball that manages to knock down the remaining six pins means that the frame is finished, with a score of 4. However, if the foul ball knocked down only some of the six standing pins, a third ball may still be rolled to attempt to knock down the remaining upright pins. 1
Scoring
One point is scored for each pin that is knocked over. So, in a hypothetical game, if player A felled 3 pins with their first ball, then 5 with their second, and 1 with the third, they would receive 9 points for that box. 1
The text above is adapted from the Wikipedia article “Candlepin bowling”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
candlepin bowling is form of bowling using tall, narrow pins and small, holeless balls, popular in New England and the Canadian Maritimes, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 4 external registers, which can be verified through the citation. 2





