The tradition & historical record
6 min read · 25 sourcesLongboarding is a variation of skateboarding typified by the use of longer boards ("decks") with longer wheelbases and softer wheels. While longboards vary widely in shape and size, compared to street skateboards longboards are designed to be more stable at speed and to have more traction due to larger wheel sizes and softer wheel durometers. While standard street skateboards may typically be between 28 and 34 inches long, longboards can range anywhere from 32 to 50 inches in length. Ride characteristics of longboards generally differ from that of street skateboards due to the use of specialized longboard trucks that have different properties than those typically used with skateboards; while street skateboards use "traditional kingpin" (TKP) trucks that are optimized for tight turning radii, ollie and flip tricks, slides, grinds, and transition skating, longboards are typically paired with "reverse kingpin" (RKP) trucks that are designed for increased stability at higher speeds, more "surfy" carving characteristics, and/or greater ride comfort for commuting over longer distances. The term "longboarding" encompasses multiple disciplines. These include downhill/race, freeride, freestyle, dance, and long-distance pushing (LDP). Longboarding's disciplines vary significantly in terms of physical requirements, intensity/impact, risk, and intended user base. 1
History
The idea of longboarding originated with surfers in Hawaii in the 1950s, who sought to bring surfing to land. They made a new kind of skateboard of thick plywood shaped into a smaller version of a surfboard, with trucks and wheels screwed to the decks, and used their surfing moves on small hills. In the 1970s, a small group of longboarders honed their techniques, and some were profiled in a 1978 SkateBoarder magazine article, "Cult of the Longboard". These pioneers saw longboarding as a form of self-expression, and were influenced by surfing. Despite the advent of polyurethane wheels (referred to as "thane" by longboarders), longboarding did not become popular until the 1970s. Longboarding lived on as an underground sport with home hobbyists continuing to make boards in their garages or strap trucks onto snowboard decks using old Kryptonic wheels from the 1970s or roller skating wheels. Randal Truck Company created the first Reverse Kingpin Trucks(RKP) in 1984. In the early 1990s, Sector 9 started mass-producing and selling longboards. The Internet has made it possible for small groups of skateboarders to communicate with each other and also gain an audience they might not have had locally, allowing the sport to grow further. Silverfish Longboarding was an active message board website during the 2000s and early 2010s before it closed, operated by Malkai Kingston. 1
Transportation
Longboards are commonly used for commuting in urban environments due to their smoother ride and stability. Commuter longboarding uses designs that take many different shapes, including long, wide cruisers as well as shorter hybrid boards. Their trucks are designed to be loose to allow for sharper turns. It is useful to have a kicktail on a commuting longboard to corner on sidewalks and lift the front of the board when riding off curbs. Generally a shorter board, 24–35 in (610–890 mm), is used for commuting, with medium-sized 65–75 mm (2.6–3.0 in) wheels to overcome bumps, cracks and other minor surface obstacles. Commuting by longboard can be more difficult in jurisdictions that restrict skateboarding and treat longboards as a kind of skateboard, and longboarders have been cited for unauthorized skateboarding. 1
Freeride
"Freeride" is a newer variation of downhill developed in the mid to late 2000s that focuses on sliding in creative ways, typically without the use of slide pucks. The decks, which are often symmetrical, may have kicktails on both sides that allow for tech slides. These decks are typically 36–44 in (910–1,120 mm) long and 8.5–10.5 in (220–270 mm) wide. Most freeride decks utilize similar construction to downhill boards. Some companies are now trying to produce freeride decks that also do freestyle. They make these hybrid boards using lighter materials and adding kicktails. 1
Downhill
Downhill longboarding (also referred to as downhill skateboarding or speedboarding) is usually done with gloves with slide pucks as a point of stability. It features speeds faster than one can push, generally between 20 miles per hour and 80 miles per hour. Speeds in excess of 80 mph have been obtained. These boards are usually 95–110 cm (37–43 in) long, with wheelbases of 28–35 in (710–890 mm), and are very stiff to improve control at speed. "Speed wobbles" pose a problem for beginner downhill riders but intermediate and advanced users overcome this keeping their weight on their front foot and elevating the heel of their back foot. Downhill decks usually fall into Six categories: top mount, micro drop, drop thru, drop deck, double drop and flush mount. Topmount boards provide the most traction but tend to be less forgiving. Micro Drops lower the ride height slightly, which results in a great all around board. Drop thru decks consist of mounting the baseplates of the trucks on top of the board with the trucks hanging through a hole. Like micro drops these tend to be all around boards and were very popular 2009–2011. Drop Decks get the rider very close to the ground, providing an easy to push and drifty ride. Double Drop decks are a drop deck with drop thru truck mounts. These decks were fairly popular in the mid-2000s but have largely fallen out of favor due to their unresponsiveness. Flush mounts seek to lower the ride height by mounting the trucks in a recessed area on the board. This minimally lowers ride height but increases the chance for wheel bite (which is where the wheels rub against the board in a turn, usually resulting in a crash). The vast majority of downhill longboards are built from wood. 1
Freestyle and dancing
"Freestyle" is a flat-ground discipline of longboarding that combines the skateboarding flip tricks with an increased use of one's feet touching the ground and their hands grabbing/picking up the board. "Dancing" is a flat-ground discipline that often overlaps demographics with freestyle. It incorporates smooth, rhythmic stepping motions while riding, inspired by traditional forms of non-wheeled dancing. Dancing is a resurgence of old-school tricks in longboarding that involves a variety of walking and spinning moves. It originates from boardwalking in surfing. A board is usually considered a dancing board when it is 45 in (1,100 mm), or more, long and can be up to 12 in (300 mm) wide, and although most of the tricks can be performed on smaller decks, a larger deck provides a more comfortable platform and is less restrictive to maneuver. The competitive landscape of longboard dancing has expanded globally, with significant circuits emerging in South America, such as the Dancing Shoes Latinoamérica tournament. 1
The text above is adapted from the Wikipedia article “Longboarding”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
longboarding is skating on a longboard, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 4 external registers, which can be verified through the citation. 2





