The tradition & historical record
7 min read · 13 sourcesA surf ski (or surfski, or surf-ski) is a type of kayak. It is generally the longest of all kayaks and is a performance oriented kayak designed for speed on open water, most commonly the ocean, although it is well suited to all bodies of water and recreational paddling. The most common use of surfskis is in surf lifesaving competitions and downwind paddling. Surfski paddling has become a pastime for water sports enthusiasts due to its open water capabilities, speed, and versatility. A surfski uses an open "sit-on-top" (SOT) cockpit and not an enclosed cockpit that requires a splash cover, or spray deck, such as olympic flatwater sprint kayaks, white-water or slalom kayaks, or touring kayaks. Many surfski models use a self-bailer to eliminate water in the cockpit area. The sit-on-top cockpit means a surfski is easy to remount in the event of a capsize and also that the hull will not fill with water. Surfskis are steered by foot-controlled pedals connected to a stern rudder. Their performance design and steering system makes it possible to paddle onto and ride open water wind swells on the ocean and other large bodies of water The modern day version of the surfski originated in the surf lifesaving movement as a means to assist swimmers in distress. As the sport of lifesaving began to develop out of the lifesaving movement, surfski paddling became one of the hallmark events of being a fit, competent lifeguard. 1
Characteristics
There are two types of surfskis, the spec ski and the ocean ski. The spec ski is the traditional craft used by surf life saving clubs and must adhere to strict size and weight. The ocean ski on the other hand is typically a longer craft with a deeper cockpit. The spec ski is built more solidly and with more rocker to manoeuvre in and out of the wave zone. The ocean ski is made for long-distance ocean paddling and is usually raced downwind with the swells. Typically 5.0-6.0 metres (16½-21 ft) long and only 40–50 cm (16-20") wide, surfskis are extremely fast when paddled on flat water and they are the fastest paddled craft available over a long distance on ocean swells. They track well but are less manoeuverable and have less transverse primary (and sometimes less secondary) stability than shorter, wider craft. Despite its typical instability, a surfski (with an experienced paddler) is a very effective craft for paddling in big surf. Its narrowness and length helps it cut or punch through large broken waves. Double-bladed paddles are used, often with highly contoured wing blades for extra efficiency. A waveski is different from a surfski, more similar to a surf board, and used primarily in surf play. It is usually less than 3 m (10 ft) long, typically with a wide planing type bottom and with one to three fixed skegs, or fins. 1
Current use
Surfskis are used worldwide for surf lifesaving, wave surfing and for training and competition on flat-water or ocean (downwind) racing. They are most popular in warmer coastal regions where the sport originated such as Australia, South Africa, New Zealand and Hawaii; however the versatility of surfski as a kayaking discipline has made it a very popular choice for paddlers worldwide especially in the Nordic regions, Western Europe, the Pacific Northwest and the East Coast of the US. Many enjoy paddling surfskis as an outdoor water sport for what it offers in terms of fitness, competition and adventure. Surfskiers will paddle regularly, at high intensity, often in races, and as often as possible to ride waves. 1
Construction and design
Some less expensive, heavier surfskis are made from polyethylene. Such plastic boats can absorb much greater abuse and can be more practical for river running, playing in shore breaks, or paddling anywhere with shallows and likely boat scraping. Light weight surfskis are made of composite layers of epoxy or polyester resin-bonded cloth: fibreglass, kevlar, carbon fibre or a mixture. To cut weight, the number of layers of the material and the amount of resin may be minimised to just that necessary for structural integrity or increased for extra strength and durability in heavy surf. Early surfskis were constructed in the same way as early surfboards, being laminated from light wood and sometimes covered with fabric. In the 1960s, the first foam surfboards and surfskis were carved from a single block of expanded polystyrene foam, strengthened with wooden stringers and covered with a thin layer of fibreglass. As the demand for surfskis grew in the 1970s, this custom method of production proved too costly and moulds were made from the most successful surfskis so that moulded craft could be made more cost effectively out of glass-fibre. At the same time, there was a divergence in ski design, one type becoming known as the lifesaving specification surfski (spec ski) and the other being the long distance or ocean racing surfski. Ocean racing surfskis differ from spec skis in that they are longer, have sharply pointed bows and under stern rudders. The front of the modern lifesaving type surfski is often flared to prevent nose diving on returning to shore when surfing down large steep waves. 1
History
Harry McLaren and his brother Jack used an early version of the surfski in 1912 around the family's oyster beds on Lake Innes, near Port Macquarie, New South Wales, Australia, and the brothers used them in the surf on Port Macquarie's beaches. The board was propelled in a sitting position with two small hand blades, which was probably not a highly efficient method to negotiate the surf. The deck was flat with a bung plug at the rear and a nose ring with a leash, possibly originally required for mooring. The rails were square and there was pronounced rocker. The board's obvious buoyancy indicates hollow construction, with thin boards of cedar fixed longitudinally down the board. Surfskis were later used by lifesavers to rescue drowning swimmers. Until the 1960s, surf boats—lightweight rowing boats with a crew of five—were responsible for the rescue work in and behind the surf line. These boats were expensive and required a huge amount of skill to be used effectively. It was soon realised that a double surfski could do almost everything that a surf boat could do, and in 1946 the importance of surfskis was noted by the surf lifesaving associations and they were included in lifesaving competitions and championships. Riders could stand up on them to surf them back to shore. These early surfskis were very wide and bear little resemblance to their modern counterparts. Over time they became narrower to maximise speed. In Britain in the eighties there were also short boats called "surfskis" that developed from surf kayaks and were made by Frank Goodwin of Valley Canoe Products and UK surfskis in south Wales. They were part of a surf canoeing discipline managed by the British Canoe Union. 1
Surf lifesaving
The surfski is used in surf lifesaving competitions all over the world including Australia, Canada, New Zealand, South Africa, the United States and in Europe. 1
The text above is adapted from the Wikipedia article “Surf ski”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
surf ski is Light boat that is paddled, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 2 external registers, which can be verified through the citation. 2





