The tradition & historical record
6 min read · 25 sourcesTenpin bowling is a type of bowling in which a bowler rolls a bowling ball down a wood or synthetic lane toward ten pins positioned evenly in four rows in an equilateral triangle. The goal is to knock down all ten pins on the first delivery (a strike), or failing that, on the second delivery (a spare). While many people approach modern tenpin bowling simply as a recreational pastime, competitive bowlers consider it a demanding sport requiring precision and skill. The 41.5-inch-wide (105 cm), 60-foot-long (18 m) lane is bordered along its length by gutters (channels) that collect errant balls. The lane's long and narrow shape limits straight-line ball paths to angles that are shallower than the ideal entry angle(s) for achieving strikes. Accordingly, bowlers impart side rotation to hook (curve) the ball into the pins to increase the likelihood of striking. A 15-foot (5 m) long approach area is used by the bowler to impart speed and apply side rotation to the bowling ball, and is separated from the lane by a foul line. Crossing this foul line is detectable via sensors and results in a score of zero for the delivery in league or tournament play. Oil is applied to approximately the first two-thirds of the lane's length to allow a "skid" area for the ball before it encounters friction and hooks. The oil is applied in different lengths and layout patterns, especially in professional and tournament play, to add complexity and regulate challenge in the sport. 1
Lanes
Tenpin bowling lanes are 60 feet (18.29 m) from the foul line to the center of the head pin (1-pin), with guide arrows (aiming targets) about 15 feet (4.57 m) from the foul line. The lane is 41.5 inches (1.05 m) wide and has 39 wooden boards, or is made of a synthetic material with the 39 "boards" simulated using marking lines. The approach has two sets of dots, respectively 12 feet (3.66 m) and 15 feet (4.57 m) behind the foul line, to help with foot placement. 1
Modern bowling lanes have oil patterns designed not only to shield the lanes from damage from bowling ball impacts, but to provide bowlers with different levels of challenge in achieving strikes. As illustrated, a typical house pattern (or THS, typical house shot) has drier outside portions that give bowling balls more friction to hook (curve) into the pocket, but heavier oil concentrations surrounding the centerline so that balls slide directly toward the pocket with less hooking. In the more challenging sport patterns used in tournaments and professional-level matches, a "flat" oil pattern—one with oil distributed more evenly from side to side—provides little assistance in guiding the ball toward the pocket, and is less forgiving with regard to off-target shots. The ratio of centerline oil concentration to side oil concentration (the oil ratio) can exceed 10-to-1 for THSs but is restricted to 3-to-1 or less for sport shots. Lane oils, also called lane conditioners, are composed of about 98% mineral oil that, with numerous additives, are designed to minimize breakdown and carry-down that would change ball reaction after repeated ball rolls. 1
Balls
Rubber balls (introduced in 1905) were eventually supplanted by polyester ("plastic") balls (1959) and polyurethane ("urethane") balls (1980s). Coverstocks (surfaces) of bowling balls then evolved to increase the hook-enhancing friction between ball and lane: reactive resin balls arrived in the early 1990s, and particle-enhanced resin balls in the late 1990s. Meanwhile, the increasingly sophisticated technology of internal cores (also called weight blocks) has increased balls' dynamic imbalance, which, in conjunction with the coverstocks' increased friction, enhances hook (curving) potential to achieve the higher entry angles that have enabled dramatic increases in strike percentage and game scores. Hook potential has increased so much that dry lane conditions or spare shooting scenarios sometimes compel use of plastic or urethane balls, to purposely avoid the larger hook provided by reactive technology. The United States Bowling Congress (USBC) regulates ball parameters including diameter (between 8.500 and 8.595 inches or 21.59 and 21.83 centimetres), circumference (between 26.704 and 27.002 inches or 67.83 and 68.59 centimetres), and weight (maximum of 16 pounds or 7.26 kilograms, no minimum). 1
Ball motion
Because pin spacing is much larger than ball size, it is impossible for the ball to contact all pins. Therefore, a tactical shot is required, which would result in a chain reaction of pins hitting other pins (called pin scatter). In what is considered an ideal strike shot, the ball contacts only the 1, 3, 5 and 9 pins (right-handed deliveries). Most new players roll the ball straight, while more experienced bowlers may roll a hook that involves making the ball start out straight but then curve toward a target, to increase the likelihood of striking: USBC research has shown that shots most likely to strike enter the pocket at an angle of entry that is achievable only with a hook. A complex interaction of a variety of factors influences ball motion and its effect on scoring results. Such factors may be categorized as: 1
The bowler's delivery (see Effect of delivery characteristics on ball motion) Characteristics of the ball's delivery that affect ball motion include the ball's speed going down the lane, its rotational speed (rev rate), the angle of the ball's axis of rotation in horizontal and vertical planes (axis rotation and axis tilt, respectively), and how far beyond the foul line that the ball first contacts the lane (loft). Bowling ball design (see Effect of coverstock, core and layout on ball motion). 1
Pins and pin carry
Bowling pins (with a maximum thickness of 4.766 inches (12 cm) at the waist) are "spotted" (placed) in four rows, forming an equilateral triangle with four pins on a side to form a tetractys. Neighboring pins are centered 12 inches (30 cm) apart, leaving a space of 7.234 inches (18 cm) between pins that can be bridged by a bowling ball of regulation diameter (8.5 inches or 22 centimetres). Pin carry—essentially determining the probability of achieving a strike if the ball impacts in or near the pocket—varies with several factors. Even before a 2008 USBC pin carry study, it was known that entry angle and ball weight affect strike percentages. The 2008 study concluded that an impact with the ball centered at "board 17.5" causes pin scatter that maximizes likelihood of striking. The material of the pin deck and "kickback" (side) plates was also found to materially affect pin carry. 1
Delivery style categories
Three widely recognized categories are stroker, cranker and tweener. 1
Strokers—using the most "classic" bowling form—tend to keep the shoulders square to the foul line and develop only a moderately high backswing, achieving modest ball rotation ("rev") rates and ball speeds, which thus limit hook potential and kinetic energy delivered to the pins. 1
The text above is adapted from the Wikipedia article “Tenpin bowling”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
ten-pin bowling is common form of bowling, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 33 external registers, which can be verified through the citation. 2





