The tradition & historical record
6 min read · 21 sourcesTraditional climbing (or trad climbing) is a type of free climbing in the sport of rock climbing in which the lead climber places temporary and removable protection while simultaneously ascending the route; when the lead climber has completed the route, the second climber (also called the belayer) will remove this protection as they ascend the route. Traditional climbing differs from sport climbing where the protection equipment is already pre-drilled into the rockface in the form of permanent bolts. Traditional climbing is still the dominant format on longer multi-pitch climbing routes, such as on alpine and big wall routes. Traditional climbing carries a much higher level of risk than with bolted sport-climbing as the climber may not have placed the temporary protection equipment correctly while trying to ascend the route, or there may be few opportunities such as cracks and fissures to insert satisfactory protection (e.g. on very difficult routes). Traditional climbing was once the dominant form of free climbing but since the mid-1980s, sport climbing — and its related form of competition climbing — became more popular for single pitch routes, and all technical grade milestones from 8a+ (5.13c) onwards were set on single-pitch sport-climbing routes. From the early 2000s, single-pitch traditional climbing returned to prominence as climbers greenpointed notable sport-climbing routes (e.g. Greenspit), and set new grade milestones (e.g. 1
Description
Traditional climbing is a form of free climbing, which means that no artificial or mechanical devices can be used to aid progression, unlike with aid climbing. It is performed in 'lead climbing pairs' where the lead climber places removable and temporary climbing protection into the climbing route while they are ascending. After the lead climber has reached the top, the second climber—or belayer—removes this temporary climbing protection as they climb the route. Some consider the hammering in of pitons while climbing the route—as long as they are only for climbing protection and not to aid progression—to also be traditional climbing, but this is not universally accepted, and is against the ethos of clean climbing to which traditional climbing is closely related. 1
Traditional climbing differs from sport climbing which has in-situ climbing protection already pre-bolted into the rock on the climbing route, and the lead climber just has to clip their rope—via quickdraws—into the fixed bolts as they ascend. As a result, sport climbing is thus a much safer and less stressful or physically demanding form of free climbing than traditional climbing. Traditional climbing is distinct from free solo climbing where no climbing protection is used whatsoever. 1
First free ascent
With the greater popularity of sport climbing, traditional climbing began to embrace some of sport climbing's redpointing techniques that are allowed in qualifying a sport-climb as a first free ascent (FFA). The previously controversial practices of hangdogging (which means repeatedly falling at a crux but without returning to the base of the climb each time), and headpointing (which means practicing the route on a top rope beforehand) are now accepted by the leading traditional climbers as valid techniques. Around the turn of the 21st century, traditional climbers began to introduce the derived term 'greenpointing' (from the Grünpunkt movement, as a play on the sport climbing Rotpunkt movement), to describe completing an ascent of an established pre-bolted sport-climb but only using "traditional protection". In some cases, the sport-climbing bolts would be physically removed—or 'chopped'—to restore the route to its natural un-bolted state as a purer form of challenge to the climber. 1
History
As 20th-century rock climbers began to free climb (avoiding any form of aid in overcoming the challenges), they often used traditional climbing techniques for their protection. Early traditional climbers relied on crude—often unreliable—forms of homemade "passive" climbing protection such as pieces of metal or chockstones attached to slings, which eventually became replaced by professionally manufactured passive protection in the form of nuts and hexes from specialist climbing equipment manufacturers. With the development of "active" traditional climbing protection in the 1970s—typically called spring-loaded camming devices (SLCDs, or "friends")—the grades of technical difficulty that traditional climbers could safely undertake on crack climbing routes increased dramatically, and new grade milestones were set on new traditional climbing routes. By the mid-1980s, the leading traditional climbers were facing technical challenges on their hardest projects as they had with minimal possibilities for traditional active climbing protection—examples being the face climbing routes they were attempting that had tiny or no cracks whatsoever in which to insert SLCDs. Ascending these routes as traditional climbs would mean using less protection and required them to accept significant personal risks—Johnny Dawes's 1986 ascent of Indian Face being a notable example. 1
Durning this era, French climbers such as Patrick Edlinger began to pre-drill permanent masonry bolts into the almost "blank" faces of Buoux and Verdon for their protection—but not as artificial aid—which became known as 'sport climbing' (e.g., it was climbing for the pure sport of it with minimal risks to the climber). 1
Equipment
Traditional climbing requires more rock climbing equipment than sport climbing as the lead climber needs to carry, and insert, protection devices while climbing the route. The choice of equipment carried will depend on the type of route being attempted. Some of the most difficult and dangerous traditional routes (e.g. Indian Face or Master's Edge) offer very little opportunity to insert protection into the rock, and thus the lead climber carries very little protective equipment. Classic traditional climbs often involve crack climbing (e.g. Separate Reality) that offers greater opportunity for inserting protection – into the crack itself – and the lead climber will carry a lot more equipment to secure their safety. Two main classes of protection are used in traditional climbing, namely: "passive" and "active". Passive protection devices include nuts, hexcentrics and tricams, and are metal shapes attached to wires or slings, which can be inserted into cracks and fissures in the rock that will act like temporary sport climbing bolts (to which quickdraws and the rope can be clipped into). Active protection consists of spring-loaded camming devices (or "friends"), which are cams that dynamically adjust to the size of the crack or fissure in the rock, but also act like temporary sport climbing bolts. 1
Risk
The traditional climber has two key concerns, or areas of risk, when placing the protection equipment while leading the traditional route. The first concern is related to the quality of the protection placements. 1
The text above is adapted from the Wikipedia article “Traditional climbing”, available under the Creative Commons Attribution-ShareAlike 4.0 licence. 1
traditional climbing is climbing style using traditional belaying methods, according to the structured record cited below. This entry was generated automatically from that record and has not yet been reviewed by a person familiar with the tradition. 2
The source record links this tradition to 2 external registers, which can be verified through the citation. 2





